F722 FC Flight Controller Stack for RC Fpv Drone

• Customization: Available
• Installation Hole Distance: 30.5mmx30.5mm
• Main Control Chip: Stm32f722
• Model NO.: F722
• Barometer: Built-in
• Black Box: Built-in 16m
• Gyroscope: Icm42688p
• OSD: At7456e
• Motor Output: 8-Way Optional
• Receiver Protocol: Elrs/Crsf/S.Bus/Futabayfysky/Tbs Crossfre/Dsmx
• Universal Serial Port: 5-Way Optional
• ESC Continuous Current: 100A X 4
• ESC Burst Peak Current: 105A X 4
• Input Signal: Dshot300/Dshot600/PWM/Bi-Directional Dshot.
• Input Voltage: 4s-8s Lithium Battery
• Firmware Name: Betaflight
• Telemetry: Support
• Transport Package: PC Plastic Box
• Specification: 37mmx37mm
• Origin: China
• Production Capacity: 60000

Product Description

 

 

F722 FC:

Main Controller: STM32F722

Gyroscope: ICM42688P

USB Interface Type: Type-C

Barometer: Built-in

OSD Chip: AT7456E

Black Box: Built-in 16M

Ammeter Input: Supported

BetaFlight Camera Parameter Adjustment Pads: Supported (3-pin socket direct connection or front pad)

Input Voltage: 4S-8S Lithium Battery

Output Power: 5V/2.5A, 9V/3A

Motor Output: 8ch

General Serial Port: 5ch

Receiver Protocol: ELRS/CRSF/S.BUS/Futabayfysky/TBs Crossfre/DSMX

LED Strip: Supported

Buzzer Pads: Supported, BZ+, BZ- connect to 5V passive buzzer

BOOT Button: Supported. Press and hold the BOOT button while inserting the USB or powering on the device to enter DFU mode for flashing firmware.

Firmware Name: AOCODARCF722V2

Mounting Hole: 30.5x30.5mm (4mm diameter)

Dimensions: 37*37mm

Weight: 9.4g

 

ESC:

Firmware: B_X_30_REV16_7

Continuous Current: 100A*4

Maximum Current: 105A (5s)

Supported Protocols: Dshot 150/300/600

TVS Protection Diode: YES

External Capacitor: 50V 2200uf High-Frequency Low-Impedance Capacitor

Temperature Protection: Supported

Input Voltage: 3-8S Lipo

Output Voltage: VBAT

Ammeter: Supported (Calibration Value 200)

Mounting Hole: M4

Hole Spacing: 30.5x30.5mm (4mm Hole Diameter)

Dimensions: 56.3*61.1mm

Weight: 29.5g