Ti Bq24616 Battery Power Charger Control Management Integrated Circuit IC Voltage Monitor Protector Electronic Components Chip

• shape: Flat
• Conductive Type: Bipolar Integrated Circuit
• Integration: MSI
• Technics: Semiconductor IC
• Application: Standard Generalized Integrated Circuit
• Type: Digital / Analog IC
• Rating: Catalog
• RoHS: Yes
• Reach: Yes
• Lead Finish / Ball Material: Nipdau / Snagcu
• Delivery Time: 1-3 Days
• Transport Package: Small Large T&R
• Specification: 9 mm² 3 x 3
• Trademark: TI
• HS Code: 8542399000
• Production Capacity: 60000

Product Description

Packaging information

Package | PinsVQFN (RGE) | 24

Operating temperature range (°C)-40 to 85

Package qty | Carrier250 | SMALL T&R

Features for the BQ24616

• Battery Thermistor Sense for JEITA Guideline
  Compatible Charger
• 600-kHz NMOS-NMOS Synchronous Buck
  Converter
• Stand-Alone Charger Support for Li-Ion or Li-
  Polymer
• 5-V-28-V VCC Input Operating Range and
  Supports 1 to 6 Battery Cells
• Up to 10-A Charge Current and Adapter Current
• High-Accuracy Voltage and Current Regulation
  • ±0.5% Charge Voltage Accuracy
  • ±3% Charge Current Accuracy
  • ±3% Adapter Current Accuracy
• Integration
  • Automatic System Power Selection From
    Adapter or Battery
  • Internal Loop Compensation
  • Internal Soft-Start
  • Dynamic Power Management
• Safety Protection
  • Input Overvoltage Protection
  • Battery Detection
  • Reverse Protection Input FET
  • Programmable Safety Timer
  • Charge Overcurrent Protection
  • Battery Short Protection
  • Battery Overvoltage Protection
  • Thermal Shutdown
• Status Outputs
  • Adapter Present
  • Charger Operation Status
• Charge Enable Pin
• 6-V Gate Drive for Synchronous Buck Converter
• 30-ns Driver Dead-Time and 99.5% Maximum
  Effective Duty Cycle
• 24-Pin, 4-mm × 4-mm QFN Package
• Energy Star Low Quiescent Current I_q
  • < 15-µA Off-State Battery Discharge Current
  • < 1.5-mA Off-State Input Quiescent Current

Description for the BQ24616

The bq2461x device is a highly integrated, Japan Electronic Information Technology Association (JEITA) guideline-compatible, Li-ion or Li-polymer switched-mode battery charge controller. The device offers a constant-frequency synchronous switching PWM controller with high-accuracy charge current and voltage regulation, charge preconditioning, termination, adapter current regulation, and charge status monitoring

The bq2461x charges the battery in three phases: preconditioning, constant current, and constant voltage. Charge is terminated when the current reaches a minimum user-selectable level. A programmable charge timer provides a safety backup. The bq2461x automatically restarts the charge cycle if the battery voltage falls below an internal threshold, and enters a low quiescent current sleep mode when the input voltage falls below the battery voltage.