F405 65A FC ESC Fly Flight Stack Flight Controller 4-in-1 3-6s Lipo for RC Fpv Drone

• Customization: Available
• Installation Hole Distance: 30.5mmx30.5mm
• Main Control Chip: Stm32f405
• Model NO.: F405 65A
• Barometer: Spl06
• Black Box: 16MB or Microsd
• Gyroscope: Icm42688p
• OSD: At7456e
• Motor Output: 8-Way Optional
• Receiver Protocol: Elrs/Crsf/S.Bus/Frsky/Futabayfysky/Tbs Crossfre/Ds
• Universal Serial Port: 5-Way Optional
• ESC Continuous Current: 60A X 4
• ESC Burst Peak Current: 70A X 4
• Input Signal: Dshot300/Dshot600/PWM/Bi-Directional Dshot.
• Input Voltage: 3-6s Lipo
• Firmware Name: Betaflight
• Telemetry: Support
• Transport Package: PC Plastic Box
• Specification: 37mmx37mm
• Origin: China
• Production Capacity: 60000

Product Description

FC:
Product Name: F4 FC With Bluetooth connection and Two BECs
MCU: F405/F407  (also available as F722 MCU)
IMU(Gyro): ICM42688
USB Port Type: Type-C
Barometer: Optional
OSD: Yes
6-pin DJI Air Unit Plug: Yes
Blackbox: Optional 16Mbit
Current Sensor Input: Supported. For the 4in1 ESC in stack, use scale 168
Power Input: 3S - 8S Lipo
5V Output: 5V 2A
10V Output: 10V 2A
4.5V Output: Supported. Designed for receiver and GPS module even when the FC is powered through the USB port. Up to 1A current load.
ESC Signal: 4x Motor output
UART: 6 x UARTs
ESC Telemetry: Yes
I2C: Yes
Traditional Betaflight LED Pad: Yes
Buzzer: BZ+ and BZ- pad used for 5V Buzzer
BOOT Button: Yes
SBUS: Yes
Supported Flight Controller Firmware: BetaFlight(Default) / Arducopter / Inav   (F722 has no Arducopter firmware support)
Firmware Target Name: Firmware will be pre-flashed when order the FC
Mounting: 30.5 x 30.5mm( 4mm hole diameter)



ESC:
Product Name: 65A 32bit 4in1 ESC
Firmware: 32Bit Bluejay compatiable firmware, optional AM32
PC Configurator Download Link: https://esc-configurator
Continuous Current: 65A * 4
Burst Current: 75A (no less than 10s)
External Capacitor: 1000uF Low ESR Capacitor(In the package)
ESC Protocol: DSHOT300/600
Power Input: 3-8S LiPo
Power Output: VBAT
Current Sensor: Support (Scale=35 Offset=0)
ESC Telemetry: Optional
Mounting: 30.5 x 30.5mm( 4mm hole diameter)