Ti Bq27520-G4 Battery Power Charge Management Chip Voltage Monitor Protector Electronic Components Integrated Circuit IC.

• Customization: Available
• Conductive Type: Bipolar Integrated Circuit
• Integration: MSI
• Model NO.: BQ27520-G4
• Rating: Catalog
• RoHS: Yes
• Reach: Yes
• Lead Finish / Ball Material: Nipdau / Snagcu
• Delivery Time: 1-3 Days
• shape: Flat
• Transport Package: Small Large T&R
• Specification: 9 mm² 3 x 3
• Trademark: TI
• HS Code: 8542399000
• Production Capacity: 60000

Product Description

Packaging information

Package | PinsDSBGA (YZF) | 15

Operating temperature range (°C)-40 to 85

Package qty | Carrier250 | SMALL T&R

Features for the BQ27520-G4

• Single-series cell Li-ion battery fuel gauge resides on system board
  • Integrated 2.5 VDC LDO
  • External low-value 10-mΩ sense resistor
• Patented Impedance Track™technology
  • Adjusts for battery aging, self-discharge, temperature, and rate changes
  • Reports remaining capacity, state-of-charge (SOC), and time-to-empty
  • Optional smoothing filter
  • Battery state-of-health (aging) estimation
  • Supports embedded or removable packs with up to 14500-mAhcapacity
  • Accommodates pack swapping with twoseparate battery profiles
• Microcontroller peripheral supports
  • 400-kHz I²C serial interface
  • 32 bytes of scratch-pad FLASH NVM
  • Battery low digital output warning
  • Configurable SOC interrupts
  • External thermistor, internal sensor, or host-reported temperature options
• Tiny 15-pin, 2610 × 1956 µm, 0.5-mm pitch NanoFree™ (DSBGA) package

Description for the BQ27520-G4

The Texas Instruments BQ27520-G4 system-side Li-ion battery fuel gauge is a microcontroller peripheral that provides fuel gauging for single-cell Li-ion battery packs. The device requires little system microcontroller firmware development. The fuel gauge resides on the main board of the system and manages an embedded battery (non-removable) or a removable battery pack.

The fuel gauge uses the patented Impedance Track™ algorithm for fuel gauging, and provides information such as remaining battery capacity (mAh), state-of-charge (%), run-time to empty (minimum), battery voltage (mV), temperature (°C), and state of health (%).

Battery fuel gauging requires only PACK+ (P+), PACK- (P-), and optional Thermistor (T) connections to a removable battery pack or embedded battery circuit. The device uses a 15-ball NanoFree™ (DSBGA) package in the nominal dimensions of 2610 × 1956 µm with 0.5-mm lead pitch. It is ideal for space-constrained applications.