|
Still deciding? Get samples of $ !
Request Sample
|
| Customization: | Available |
|---|---|
| Installation Hole Distance: | 30.5mmx30.5mm |
| Main Control Chip: | Stm32f722 |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
F722 Flight Controller:
Main Controller: STM32F722
Gyroscope: ICM42688P
USB Interface Type: Type-C
Barometer: Built-in
OSD Chip: AT7456E
Black Box: Built-in 16M
Ammeter Input: Supported
BetaFlight Camera Parameter Adjustment Pads: Supported (3-pin socket direct connection or front pad)
Input Voltage: 4S-8S Lithium Battery
Output Power: 5V/2.5A, 9V/3A
Motor Output: 8ch
General Serial Port: 5ch
Receiver Protocol: ELRS/CRSF/S.BUS/Futabayfysky/TBs Crossfre/DSMX
LED Strip: Supported
Buzzer Pads: Supported, BZ+, BZ- connect to 5V passive buzzer
BOOT Button: Supported. Press and hold the BOOT button while inserting the USB or powering on the device to enter DFU mode for flashing firmware.
Firmware Name: AOCODARCF722V2
Mounting Hole: 30.5x30.5mm (4mm diameter)
Dimensions: 37*37mm
Weight: 9.4g
80A 8S ESC:
Firmware: Q_H_40_24_v0.19.2.hex
Wireless parameter tuning: Not supported; all parameters can be tuned via data cable connection to Betaflight.
Continuous current: 80A*4
Maximum current: 90A
Electronic speed control and telemetry: Not supported
TVS protection diode: Yes
External capacitor: 50V 2200uf high-frequency low-impedance capacitor
Temperature protection: Supported
Input voltage: 4S-8S lithium-ion battery
Output voltage: VBAT
Ammeter: Supported
Mounting hole: M4
Mounting hole size: 30.5x30.5mm (4mm diameter)
Dimensions: 57*56mm
Weight: 28g
Packing list:
F405 FC x 1
80A ESC x 1
8PIN SH1.0 connection cable x1
XT90power line x 1
M3 x 8 shock-absorbing balls x 8
Nut x 8
M3x25mm Metal Screw x 4
50V 2200uf Solid stateelectrolytic capacitor x 1
){kind=link}