F405 FC Flight Stack Flight Controller

• Customization: Available
• Installation Hole Distance: 30.5mmx30.5mm
• Main Control Chip: Stm32f405
• Model NO.: F405
• Barometer: SPA06-003
• Black Box: 16MB or Microsd
• Gyroscope: Icm42688p
• OSD: At7456e
• Motor Output: 8-Way Optional
• Receiver Protocol: Elrs/Crsf/S.Bus/Frsky/Futabayfysky/Tbs Crossfre/Ds
• Universal Serial Port: 5-Way Optional
• ESC Continuous Current: 60A X 4
• ESC Burst Peak Current: 70A X 4
• Input Signal: Dshot300/Dshot600/PWM/Bi-Directional Dshot.
• Input Voltage: 3-6s Lipo
• Firmware Name: Spedixf405
• Telemetry: Support
• Transport Package: PC Plastic Box
• Specification: 37mmx37mm
• Origin: China
• Production Capacity: 60000

Product Description

F405 Flight Controller:

Main controller: STM32F405

Gyroscope: ICM42688P

USB interface type: Type-C

Barometer: Built-in, SPA06-003

OSD chip: AT7456E

GPS connection: 6-pin direct connection or wire bonding

Black box: Built-in 16M

Ammeter input: Supported

BetaFlght camera parameter adjustment pad: Supported (3-pin socket direct connection or front pad)

Input voltage: 4S-8S lithium battery (via the 10-pin interface on the back or the GND and BAT pins in the pad)

5V BEC output: 8 groups of 5V outputs (PCBA has 4 +5V pads + 4 sockets for 5V output), total current output 2A

12V BEC Output: 2 sets of 12V outputs (PCBA has 1 +12V output, and one socket on the board contains a +12V output), total current output 2A

ESC Signals: Front M1-M4, M5-M8 (supports 4-8 axes)

UART Serial: 4 serial ports

Traditional Beteflight LED Pads: Supported, 5V, GND, and LED pads on the PCBA surface

Buzzer Pads: Supported, 5V and BZ connected to the 5V passive terminal for buzzer

Boot Button: Supported, press and hold the BOOT button while inserting the USB or powering on to enter DFU mode for firmware flashing

SmartPort: Supported, any serial port TX can be used

Firmware Target Name: SPEDIXF405

Mounting Hole Dimensions: 30.5x30.5mm

Dimensions: 36*36mm

Weight: 7g

 

60A ESC:

Firmware: J_H_30_REV16_7

Wireless parameter tuning: Not supported; all parameters can be tuned via data cable connection to Betaflight

Continuous current: 60A*4

Maximum current: 70A (5 seconds)

TVS protection diode: YES

External capacitor: 1000uf high-frequency low-impedance capacitor

ESC/motor protocol: DSHOT300/600

Input voltage: 3S-6S lithium-ion battery

Output voltage: VBAT

Ammeter: Supported

Mounting hole: M4

Mounting hole size: 30.5x30.5mm (4mm diameter)

Dimensions: 42*41mm

Weight: 11.5g

 

Packing list:

F405 FC x 1

60A ESC x 1

8PIN SH1.0 connection cable x1

XT60power line x 1

M3 x 8 shock-absorbing balls x 8

Nut x 8

M3x25mm Metal Screw x 4

35V 1000uF Solid stateelectrolytic capacitor x 1