Ti Lm3658 Battery Power Charge Management Chip Voltage Monitor Protector Electronic Components Integrated Circuit IC.

• Customization: Available
• Conductive Type: Bipolar Integrated Circuit
• Integration: MSI
• Model NO.: LM3658
• Rating: Catalog
• RoHS: Yes
• Reach: Yes
• Lead Finish / Ball Material: Nipdau / Snagcu
• Delivery Time: 1-3 Days
• shape: Flat
• Transport Package: Small Large T&R
• Specification: 9 mm² 3 x 3
• Trademark: TI
• HS Code: 8542399000
• Production Capacity: 60000

Product Description

Packaging information

Package | PinsWSON (DSC) | 10

Operating temperature range (°C)-40 to 85

Package qty | Carrier1,000 | SMALL T&R

Features for the LM3658

• Integrated power FETs with thermal regulation
• Charges from either an AC wall adapter or USB power source with automatic source selection
• 50 mA to 1000 mA charge currents using AC wall adapter
• Pin-selectable USB charge currents of 100 mA or 500 mA
• LDO mode with 1A of source current is automatically invoked when the battery is absent and the AC wall adapter is connected
• Continuous battery temperature monitoring
• Built-in multiple safety timers
• Charge status indication
• Continuous over-current and temperature protection
• Near-depleted battery pre-conditioning
• Sleep mode with ultra low quiescent current
• On-board Kelvin-sensing achieves ±0.35% termination accuracy
• Maintenance mode with automatic recharge
• Thermally enhanced 3 mm x 3 mm LLP package

Description for the LM3658

The LM3658 is a single chip charger IC designed for handheld applications. It can safely charge and maintain a single cell Li-Ion/Polymer battery operating from an AC wall adapter or USB power source. Input power source selection of USB/AC is automatic. With both power sources present, the AC power source has priority. Charge current is programmed through an external resistor when operating from an AC wall adapter allowing charge currents from 50 mA to 1000 mA. When the battery is charged using USB power, charge currents of 100 mA or 500 mA are pin-selectable. The termination voltage is controlled to within ±0.35% of 4.2V.

The LM3658 requires few external components and integrates internal power FETs, reverse current protection and current sensing. The internal power FETs are thermally regulated to obtain the most efficient charging rate for a given ambient temperature.

The LM3658 operates in five modes: pre-qualification mode, constant-current mode, constant-voltage mode, top-off mode and maintenance mode. Additionally, the charger IC operates as a linear regulator in "LDO mode", when the AC wall adapter is connected and no battery is present. Optimal battery management is obtained through thermal regulation, battery temperature measurement and multiple safety timers. The LM3658 provides two open-drain outputs for LED status indication or connection to GPIOs.