Ti Bq25171-Q1 Battery Power Charge Management Chip Electronic Components Integrated Circuit IC.

• shape: Flat
• Conductive Type: Bipolar Integrated Circuit
• Integration: MSI
• Technics: Semiconductor IC
• Application: Standard Generalized Integrated Circuit
• Type: Digital / Analog IC
• Model NO.: BQ25171-Q1
• Rating: Catalog
• RoHS: Yes
• Reach: Yes
• Operating Temperature Range (°c): -40 to 125
• Transport Package: 3, 000 Large T&R
• Trademark: TI
• HS Code: 8542399000
• Production Capacity: 60000

Product Description

Quality information

RatingAutomotive

RoHSYes

REACHYes

Lead finish / Ball materialNIPDAU

MSL rating / Peak reflowLevel-2-260C-1 YEAR

 

Packaging information

Package | PinsVSON (DRC) | 10

Operating temperature range (°C)-40 to 125

Package qty | Carrier3,000 | LARGE T&R

Features for the BQ25171-Q1

• AEC-Q100 qualified for automotive applications
  • Temperature grade 1: -40°C ≤ T_A ≤ 125°C
  • HBM ESD classification level 2
  • CDM ESD classification level C4B
• 40-V load-dump tolerant to support charging back-up battery directly from main battery, 3-V to 18-V operating
• Automatic Sleep Mode for low power consumption
  • 350-nA battery leakage current
  • 2-µA input leakage current when charge disabled
• Support multi-chemistry battery
  • 1- to 2-cell Li-Ion, Li-Poly, and LiFePO₄
  • 1- to 6-cell NiMH with intermittent-charging support
• External resistor programmable operation
  • VSET to set battery regulation voltage from 3.5 V to 8.4 V for Li-Ion, or 1- to 6-cell for NiMH
  • ISET to set charge current from 10 mA to 800 mA
  • CHM_TMR to set battery chemistry as Li+ or NiMH, and charge timer duration
• High accuracy
  • ±0.5% charge voltage accuracy
  • ±10% charge current accuracy
• Charging features
  • Precharge current 20% of ISET
  • Termination current 10% of ISET
  • NTC thermistor input to monitor battery temperature
  • CE pin for charging function control
  • Two Open-drain output for status and fault indication
• Integrated fault protection
  • 18-V IN overvoltage protection
  • VSET based OUT overvoltage protection
  • 1000-mA overcurrent protection
  • 125°C thermal regulation; 150°C thermal shutdown protection
  • OUT short-circuit protection
  • VSET, ISET, CHM_TMR pins short/open protection

Description for the BQ25171-Q1

The BQ25171-Q1 is an automotive rated, 800-mA linear charger for 1-cell and 2-cell Li-Ion, Li-Polymer, and LiFePO₄, in addition to 1-cell up to 6-cell NiMH battery applications.The device has a single power output that charges the battery. The system load can be placed in parallel with the battery, as long as the average system load does not prevent the battery from charging fully within the safety timer duration. When the system load is placed in parallel with the battery, the charge current is shared between the system and the battery.

The device has three phases for charging a Li-Ion battery: precharge to recover a fully discharged battery, fast-charge constant current to supply the bulk of the charge, and voltage regulation to reach full capacity.

The device charges a NiMH in constant current mode only, and terminates the charge cycle when the programmable timer expires or the battery voltage exceeds the VOUT_OVP threshold.In all charge phases, an internal control loop monitors the IC junction temperature and reduces the charge current if an internal temperature threshold, T_REG, is exceeded.